XGP Series Single Cylinder Hydraulic Cone Crusher

 XGP single-cylinder hydraulic cone crusher is a combination of mechanical, hydraulic, automation, intelligent control and other technologies. It is suitable for medium and fine crushing of medium-hard materials. It has simple and reliable structure, low failure rate, low production cost and strong operation stability. With the advantages of convenient maintenance, it is widely used in metallurgy, construction, hydropower, transportation, building materials and other industrial fields, and occupies an important share in the market.

PE Series Jaw Crusher

 Jaw crusher is a commonly used coarse crushing equipment in sand and gravel production line. It can process all kinds of hard ore and rock materials whose compressive strength is not higher than 280MPa. It has the advantages of simple structure, durable, reliable operation, large crushing ratio, Energy saving, low noise, easy maintenance and other features, it is a commonly used crushing equipment in the sand and gravel industry.

Light Hammer Crusher

 XGN-Q series light hammer crusher, commonly known as hammer crusher, optimizes the traditional hammer crusher and designs a more practical new hammer crusher without grating bars, which is suitable for brittle materials with a compressive strength not greater than 150Mpa.

What are the machines that can crush stones into sand? How much?

 

What are the machines that can crush stones into sand?

01、Double roller sand making machine:

The roller sand making machine is mainly composed of rollers, roller support bearings, driving devices and adjusting devices. The material is mainly crushed through the adjustment device between the roller and the driver. It is suitable for medium and fine crushing of ores and rocks with medium hardness and below. Compared with other sand making machines, it consumes less and has better sand particles. However, because its output is not high, it is mostly used in some small and medium-sized sand and gravel plants.

Roller sand making machine

02、 hammer sand making machine:

The main working principle of the hammer sand making machine is to use a rotor with a hammer head to impact, grind, crush, etc. the stone. The entire sand making process is very smooth, the material discharge is stable, and the production capacity is guaranteed; it is widely used in sand making, mineral processing, Cement, metallurgy, chemical industry, building materials and other fields.

Hammer crushing sand making machine

03、Impact sand making machine:

The output of the impact sand making machine can reach 20-650 tons per hour, which can meet the output requirements of most users. It has introduced foreign advanced technology and improved it based on domestic production needs. It has strong processing capacity and a wide range of applicable materials. It can process both low-hardness and high-hardness materials. It also has a shaping function and has less dust during production. It has low noise, wear-resistant body and durability.

Impact sand making machine

04、Mobile sand making machine:

The main difference between the mobile sand making machine and the fixed sand making machine is that it can move freely and is not restricted by the site and environment. At the same time, according to production needs, sand making equipment such as sand making machines, fine crushers, and hammer crushers can be configured to make sand making production more efficient and allow users to recover costs faster.

Mobile sand making machine

How much does a stone and sand crushing machine cost?

It’s up to you which device you choose!

The starting price of roller sand making machine and hammer sand making machine is around 10,000;

The starting price of an impact sand making machine is around 50,000;

The starting price of a mobile sand making machine is around 300,000.

How much does a small stone sand crusher cost? What are the uses of sand from crushed stones?

 

List of common small stone sand crusher equipment

Common small stone sand crushing equipment include:

01、 roller sand making machine (output: 5-110t/h)

02、fine sand crusher (output: 5-260t/h)

03、compound sand crusher (output: 5-100t/h) h)

04、impact sand crusher (output: 10-650t/h)

How much does a small stone sand crusher cost?

The starting price is around 10,000 yuan, depending on the type and model.

The four types of small stone sand crushers mentioned above each have their own characteristics, and the price difference between different types of equipment is relatively large. In addition, in addition to the type of equipment, model output, it is also related to the manufacturer's design, material selection and manufacturing process. , because there are many manufacturing companies, and the sales channels and purchase time are different, so how much does it cost to purchase a set of small stone sand crusher? Consult the specific equipment manufacturer. It is recommended to carefully examine the machine before purchasing, conduct on-site inspections, and conduct multiple comparisons.

Impact crushing sand making machine

What are the uses of sand after crushed stone?

After being processed by a professional stone sand crusher, the raw stone can be crushed into three types: Type I, Type II and Type III. Different levels are of great use:

Type I sand: Concrete with a strength level greater than C60, used for laying higher-required prestressed structures, piers, and pavements;

Type II sand: Concrete with strength grade C30-C60 and frost resistance, impermeability or other requirements, used for laying long-span beams, slabs and pavements;

Class III sand: Concrete and construction mortar with a strength grade less than C30, used for highway ancillary structures, retaining walls, and culverts.

In recent years, the construction market has experienced huge demand, which has promoted the rapid development of the sand and gravel market. The machine-made sand produced by the stone sand crusher has also replaced the market with its advantages and has become one of the important sources of building materials.

Should we use jaw crusher or hammer crusher to produce gravel? the difference

 Jaw crusher and hammer crusher are both crushing equipment for sand and gravel aggregate production lines. The utilization rate of these two equipments in industrial crushing production lines is relatively high.

Jaw crusher

hammer crusher

The difference between jaw crusher and hammer crusher

Speaking of the difference between the two, customers who know it can tell it at a glance. The specific differences are as follows:

01、Different structures

The structure of the hammer crusher consists of casing, rotor, hammer head, main shaft, impact lining plate, screen plate, etc. The structure of the jaw crusher consists of a fixed jaw plate, a movable jaw plate, a frame, an upper and lower guard plate, an adjusting seat, a movable jaw rod, etc.

02、Different ways of working

Jaw crushing uses jaw plates for extrusion crushing, while hammer crushing uses a high-speed rotating hammer head to impact and crush materials.

03、Applicable materials are different

Jaw crusher can crush various soft and hard materials, with a compressive strength between 300-350Mpa, such as: granite, quartz stone, diabase, river pebbles, iron ore, etc.;

Hammer crusher is mainly used to crush ores with low hardness and compressive strength generally lower than 200Mpa, such as limestone, bluestone, coal gangue, etc.

04、Different discharge granularity adjustment methods

Hammer crushing is achieved by adjusting the movable liner at the bottom discharge port to achieve the particle size of the finished material. There are generally three ways to adjust the jaw crusher: backing plate adjustment, wedge block adjustment and hydraulic cylinder adjustment.

05、Different functions on the production line

The finished materials produced by the jaw crusher have a relatively high content of needle pieces, so they need to be equipped with a shaping machine for secondary crushing. Hammer crushing can be used to break into shape without secondary crushing, and there is no need for a shaping machine. Therefore, hammer crushing is often used alone in small and medium-sized production lines.

Hammer crusher working site

Jaw crusher working site

Should we use jaw crusher or hammer crusher to produce gravel?

Different uses, different usage environments, there will be different choices! Therefore, whether to use jaw crusher or hammer crusher to produce stones depends on the actual production situation of the customer.

Here are some suggestions for you. If the materials you crush are pebbles, quartz, iron ore and other high-hardness materials, it is recommended to choose jaw crusher. If the crushed materials are limestone, coal gangue and other materials with low hardness, it is recommended to choose hammer crushing.

If the output is relatively small and it belongs to a small and medium-sized production line, you can consider hammer crushing. Hammer crushing is used to form a shape. A shaping machine is not needed. It only needs to be equipped with auxiliary equipment such as a vibrating screen and a feeder to form a production line.

What are the medium-sized gravel crushers worth around 100,000?

 A stone crusher costs RMB 10,000 to RMB 20,000, or hundreds of thousands, and there are dozens of types. Even if the scope is narrowed down to a cost of RMB 100,000, there are still many types: jaw crusher for primary crushing, impact crusher for secondary crushing. , cone crusher for secondary medium and fine crushing, hammer crusher for one-time molding, roller crusher for low cost, compound crusher for low loss, etc. So how to choose? The following is a detailed introduction for you.

1. Raw material feed size is above 500mm: (price is above RMB 80,000)

Medium-sized crushing machine model with a price of about 100,000: Jaw crusher (PE600*900, PE750*1060, PE800*1060)

Applicable materials: limestone, basalt, rock, construction waste, iron ore, etc.

Details of incoming and outgoing materials: Incoming material particle size is between 500-650mm, discharge opening adjustment range is 80-220mm, production capacity is 110-336t/h

Medium-sized jaw crusher: coarse crushing material crusher

The jaw crusher in the medium-sized stone crusher is a coarse crushing equipment that can crush materials of various hardnesses. The Red Star manufacturer uses high-quality steel plate welded frames and non-welded frames on the jaw crushers to avoid various situations and the crushing force of the tiger's mouth. Strong, the efficiency is about 30% higher than other equipment, the crushing cavity is deep and there is no dead zone, and the crushing ratio is increased by 20%.

2. Raw material feed size is above 200mm: (price is about 120,000)

Medium-sized crushing machines worth around 100,000 yuan: cone crusher (S160, S250, S560, S750, HP500, HP800) impact crusher (PF1007, PF1010, PF1210)

Applicable materials: basalt, granite, iron ore, limestone, gypsum, marble and other materials

Details of the incoming and outgoing materials: the feeding particle size range is 200-370mm, the discharge port adjustment range is 8-25mm, and the production capacity is 57-328t/h.

Cone and counterattack: stone crusher feeding more than 200mm

3. Stone crushing machine with raw material hardness level 6 or above: (price above 100,000)

Medium-sized gravel crushing machines worth around RMB 100,000: single-cylinder cone S160, S250, S560, multi-cylinder cone HP500, HP800, fully hydraulic cone GYS500

Applicable materials: basalt, granite, iron ore and other high-hardness materials

Details of the incoming and outgoing materials: the feeding particle size range is 200-370mm, the discharge port adjustment range is 8-25mm, and the production capacity is 57-328t/h.

4. The compressive strength of the material is less than 350 MPa: (price is more than 89,000)

Medium-sized stone crushing machine model with a price of about 100,000: impact crusher (PF1007, PF1010, PF1210)

Applicable materials: marble, limestone, limestone, bluestone, gypsum, construction waste and other medium and low hardness materials

Details of incoming and outgoing materials: Incoming material particle size is below 350mm, processing capacity is 30-130t/h

Impact crusher: medium and low hardness material crusher

5. The finished gravel product requires "one-time molding" model: (price is more than 85,000)

Medium-sized stone crushing machines with a price of about 100,000 yuan: heavy hammer crusher PCZ1308, PCZ1410

Applicable materials: limestone, bluestone, sandstone, etc. with compressive strength less than 200 MPa

Details of incoming and outgoing materials: Incoming material particle size ≤450mm, production capacity 80-210t/h

Heavy hammer crusher: one-time forming stone crusher

The heavy hammer crusher is a newly designed equipment among medium-sized crushers. It adopts multiple hammer heads for cyclic crushing and no grate bar design. When the material does not meet the discharge requirements, it can be processed continuously to achieve the effect of "one-time molding" , the particle size of the finished product is uniform, comparable to a sand making machine, the finished product can be discharged up to about 5mm, and the gradation is reasonable.

How much does a cone crusher of 300-400 tons per hour cost?

 

1、Single-cylinder cone crusher: between 280,000 and 400,000 yuan

01. Model SC250: cavity type F1, production capacity below 396t/h, feed particle size ≤215mm, discharge opening 16mm, motor power 250KW.

02. Model SC315: Cavity type F1/F2/F3, all three can meet this standard. The production capacity is between 162-662t/h, the feed particle size is 85-275mm, and the discharge port particle size is 13-16mm.

03. Model SC250S: mainly for medium crushing of materials, with a production capacity of 225-605t/h, a feed particle size of 400-450mm, and a discharge port particle size of 22-35mm.

Single cylinder cone crusher, between 280,000 and 400,000

2、multi-cylinder cone crusher: between 240,000 and 400,000

01. Model HXHP300: C1/C2/C3. All three cavity types can achieve an output of 300-400 per hour, the feed particle size is 115-200mm, the discharge port adjustment range is 16-45mm, and the motor power is 220KW.

02. Model HXHP500: All six cavity types can meet the output requirement of 300-400 tons per hour, the feed particle size is 75-285mm, the discharge port adjustment range is 8-51mm, and the motor power is 400KW. Compared with the output, this ability Consumption is low.

Multi-cylinder hydraulic cone crusher, between 240,000 and 400,000 yuan

3、Fully hydraulic cone crusher: between 195,000 and 420,000 yuan

01. Model HXGYS500: C1/C2/C3/F1/F2. The five cavity types meet the output requirements of 300-400 tons per hour. The production capacity is between 136-650t/h. The feeding port size is 76-228mm. The discharge granularity The range is between 6-64mm.

02. Model HXGYS400: The output of C1 cavity is 207-400t/h, the crushing cone diameter is 1200mm, the feed particle size is ≤2005mm, and the discharge opening size is 19-51mm. This type of cone crusher is cheap and cost-effective.

Fully hydraulic cone crusher, between 195,000 and 420,000